United States v. Middlebrooks

Decision Date20 August 1970
Docket NumberNo. 27859.,27859.
Citation431 F.2d 299
PartiesUNITED STATES of America, Plaintiff-Appellee, v. Clarence Eugene MIDDLEBROOKS, Jr., Defendant-Appellant.
CourtU.S. Court of Appeals — Fifth Circuit

Edward R. Kirkland, Orlando, Fla., for appellant.

John L. Briggs, U. S. Atty., Middle District of Florida, Allan P. Clark, Asst. U. S. Atty., Middle District of Florida, John W. Caven, Jr., Jacksonville, Fla., for appellee.

Before JONES, WISDOM, and COLEMAN, Circuit Judges.

WISDOM, Circuit Judge:

A federal grand jury returned a twenty-one count indictment against Clarence E. Middlebrooks, doing business through Turbonique, Inc., for using the mails in furtherance of a scheme to defraud, in violation of 18 U.S.C. § 1341. The defendant, highly intelligent, but not a lawyer, insisted on conducting his own defense. As usual in such cases, his dual position created difficulties for him, for the court, and for the trial jury. The jury found Middlebrooks guilty on sixteen counts and not guilty on three counts; the Government dismissed the other counts. The trial judge sentenced him to two years imprisonment and fined him $4000 on eight counts. He was given a suspended sentence and a total probationary period of five years to run consecutively to the sentence of imprisonment imposed on count five. Middlebrooks perfected his appeal through retained counsel.

The defendant designed, manufactured, and sold, through the United States mails, supercharger and turbine kits that were virtually impossible for the average mechanic to assemble. These kits rarely contained more than six rough metal castings, although pictures of the kits in various magazines usually showed ten or twelve parts. Turbonique catalogues said: "Can be easily installed with the use of small, basic machine and hand tools." Testimony at the trial revealed that a sixteen inch lathe, drill press, and precision balancing equipment were necessary tools for assembling the Turbonique Model No. C-2-C Supercharger. Perhaps a person with the defendant's eccentric genius for mechanical engineering might be able to take the raw materials and make them operable by adding an ignition system, fuel tank, plumbing fixtures, valves and bearings, but this was beyond the capability of the ordinary mortal. The expense of extra machinery, of necessary skilled craftsmen, of special fuel, and of additional parts added up to about $500 to $900 beyond the purchase price of about $100 to $150. This Middlebrooks must have known.

The brochures and form letters the defendant used to sell his product offered supercharger casting kits at a so-called fifty percent dealer discount and also offered a distributorship for Turbonique products. Every purchaser was offered the discount and a distributorship. Turbonique sent form letters to prospective customers stating that: "Your name was mentioned at a sales meeting with regard to an exclusive Turbonique distributorship in Lapeer County." The only salesman employed at Turbonique was the defendant.

All Turbonique supercharger and turbine "kits" were shipped C.O.D. so that the buyer was required to pay before inspecting the merchandise received. Middlebrooks would then have his money and the purchaser would have nothing of value unless he were willing to expend additional sums of money to make an operable unit. In the final analysis, a buyer of one of the "kits" would either be stuck with something valueless to him and charge off the transaction to experience, or he would have to engage in a series of progressively more expensive purchases to assemble and make operable the initial purchase of rough metal castings. Once a Turbonique customer had parted with his money, there was virtually no hope of obtaining a refund. Return shipments were authorized only for exchange and as credit toward purchases of more expensive supercharger models.

The record shows that the scheme to defraud, for which the mails were an essential element, was premised on half truths, subtle concealment of material facts, and patent falsehoods. Instead of a product "easily installed", a purchaser acquired a few parts which with the addition of other parts and the skills of an electrician, plumber, and machinist, just might some day be part of an operable supercharger.

The accepted principle is that where there is a jury verdict against the defendant, the evidence must be viewed in a light most favorable to the Government. Shale v. United States, 5 Cir. 1968, 388 F.2d 616, cert. denied 393 U.S. 984, 89 S.Ct. 456, 21 L.Ed.2d 445. Even without benefit of this principle, the record compels the Court to hold that the question of the defendant's guilt or innocence was properly submitted to the jury.

On appeal, zealous counsel for the defendant raised eight points. None of these have any merit. We observe that some of the trial judge's comments to which counsel objects were made necessary because of Middlebrooks's dual role as defendant and lawyer for the defense. Middlebrooks argued with witnesses, interjected scandalous and inflammatory remarks, and violated miscellaneous procedural rules during his conduct of the trial. It was a lengthy trial. The district judge showed commendable moderation in keeping the trial on the tracks, and not prejudicing the jury against the defendant, in spite of provocatory conduct on the part of the defendant.

During the course of its deliberations, the jury requested the court to give additional instructions on the definition and elements of mail fraud. One of the jurors had asked for an explanation of the difference between unethical and fraudulent conduct. This question would tax philosophers. In his original charge the trial judge had given proper instructions on the elements of the offense here. We uphold his decision to decline to answer the specific question and to reiterate his original instructions on the elements of mail fraud. See Eisenhardt v. United States, 5 Cir.1969, 406 F.2d 449, 451; Pope v. United States, 8 Cir.1967, 372 F.2d 710, 731, vacated on other grounds 392 U.S. 651, 88 S.Ct. 2145, 20 L.Ed.2d 1317; United States v. Hall, 2 Cir.1965, 346 F.2d 875, 879, cert. denied, 382 U.S. 910, 86 S.Ct. 250, 15 L.Ed.2d 161; Clark v. United States, 5 Cir.1923, 293 F. 301, 304.

We hold that the summaries of complaints received by...

To continue reading

Request your trial
19 cases
  • U.S. v. Evans
    • United States
    • U.S. Court of Appeals — Fifth Circuit
    • 4 Mayo 1978
    ...500 F.2d 751, 754 (5th Cir. 1974), rev'd on other grounds, 425 U.S. 435, 96 S.Ct. 1619, 48 L.Ed.2d 71 (1976); United States v. Middlebrooks, 431 F.2d 299, 302 (5th Cir. 1970), cert. denied, 400 U.S. 1009, 91 S.Ct. 569, 27 L.Ed.2d 622 (1971). No such abuse has been demonstrated in this case.......
  • U.S. v. Kim, 78-1627
    • United States
    • U.S. Court of Appeals — District of Columbia Circuit
    • 12 Marzo 1979
    ...Society, 501 F.2d 550, 554 (1st Cir. 1974); Colvin v. United States, 479 F.2d 998, 1003 (10th Cir. 1973); United States v. Middlebrooks, 431 F.2d 299, 302 (5th Cir. 1970), Cert. denied, 400 U.S. 1009, 91 S.Ct. 569, 27 L.Ed.2d 622 (1971); Colorificio Italiano Max Meyer, S.P.A. v. S/S Helleni......
  • U.S. v. Scallion
    • United States
    • U.S. Court of Appeals — Fifth Circuit
    • 17 Junio 1976
    ...conclude that there was no abuse of discretion by the trial judge in admitting such records into evidence. See United States v. Middlebrooks, 431 F.2d 299, 302 (5th Cir. 1970), cert. denied, 400 U.S. 1009, 91 S.Ct. 569, 27 L.Ed.2d 622 (1971). Whether the trial judge erred in refusing to sup......
  • Reyes v. Wyeth Laboratories
    • United States
    • U.S. Court of Appeals — Fifth Circuit
    • 31 Julio 1974
    ...and that they were prepared at or near the time in issue is a predicate to admission under § 1732(a). See, e. g., United States v. Middlebrooks, 5 Cir. 1970, 431 F.2d 299, 302, cert. denied, 1971, 400 U.S. 1009, 91 S.Ct. 569, 27 L.Ed.2d 622. Yet nowhere does the Act require that the foundat......
  • Request a trial to view additional results

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT